Icom IC-R6 R6 wide band UHF VHF scanner receiver

$229.45
Unit price per

Shipping calculated at checkout.

Item ICOM IC R6 Wide Band Handheld Receiver (USA) ICR6 ICR 6 Specs
Frequency coverage France	0.100 - 1309.995* MHz 0.100–29.995, 50.2–51.2, 87.5–107.995, 144–146, 430–440, 1240–1300 MHz *Cellular blocked; U.S.A version
Mode	AM, FM, WFM
Number of memory channels	1300 regular, 50 scan edges and 200 auto memory write
Usable temperature range	-10°C to +60°C +14°F to +140°F
Frequency stability	±1.0ppm (25°C)
Tuning steps	5, 6.25, 8.33, 9, 10, 12.5, 15, 20, 25, 30, 50,100, 125, 200 kHz * Selectable depending on operating bands.
Battery requirement	2×R6 (AA) size Ni-MH or Alkaline cells
External power supply	4.5V DC rated (4.5-6.3V with BC-196SA/SD, CP-18A/E)
Current drain Rated audio Standby Power save	(at 3.0v DC; typical) 130 mA (Ext. SP, backlight off) 65 mA 30 mA (1:4 duty)
Antenna impedance	50Ω (SMA)
Dimensions (projections not included)	58(W) × 86(H) × 29.8(D) mm 2⁹⁄₃₂(W) × 3³⁄₈(H) × 1¹⁄₁₆(D) in
Weight	200 g; 7.1 oz

Receiver

Intermediate frequencies
FM, AM
WFM

266.7MHz, 19.65 MHz, 450 kHz
266.7 MHz, 19.95 MHz, 750 kHz

Sensitivity (except spurious points):

FM (at 12dB SINAD)

(*USA version)

WFM (at 12dB SINAD)

AM (at 10dB S/N)

1.625 - 4.995 MHz
5.000 - 29.995 MHz
30.000 - 117.995 MHz
118.000 - 246.995 MHz
247.000 - 469.995 MHz
470.000 - 832.995 MHz
833.000 - 1029.995 MHz
1030.000 - 1309.995 MHz
76.000 - 108.000 MHz
175.000 - 221.995 MHz
470.000 - 770.000 MHz
0.495 - 4.995 MHz
175.000 - 221.995 MHz
470.000 - 770.000 MHz
0.495 - 4.995 MHz
5.000 - 29.995 MHz
118.000 - 136.000 MHz
222.000 - 246.995 MHz
247.000 - 329.995 MHz

0.32 µV
0.25 µV
0.18 µV
0.18 μV
0.18 µV
0.32 µV
0.28 µV
0.35 µV
1.1 µV
1.1 µV
1.8 µV)
1.3 µV
0.71 µV
1.0 µV
1.3 µV
0.89 µV
0.63 µV
0.63 µV
0.79 µV

Selectivity
AM, FM

WFM

More than 12 kHz/–9dB
Less than 30 kHz/–60dB
More than 150 kHz/–6dB

AF output power (at 3.0V DC)
Internal speaker (16Ω load)
External speaker (8Ω load)

More than 150mW
80mW

External SP connector

3-conductor 3.5 (d) mm (¹⁄₈″) /8Ω

Applicable U.S. Military Specifications

Icom makes rugged products that have been tested to and passed the following MIL-STD requirements and strict environmental standards.

Standard	MIL 810 F
Standard	Method	Proc
Low Pressure	500.4	I, II
High Temp.	501.4	I, II
Low Temp.	502.4	I, II
Temp. Shock	503.4	I
Solar Radiation	505.4	I
Humidity	507.4	–
Vibration	514.5	I
Shock	516.5	I, IV
Ingress Protection Standards
Water	IPX2 (Drip resistant

Also meets equivalent MIL-STD-810-C, -D and -E.

All stated specifications are subject to change without notice or obligation.

Supplied accessories

Ni-MH cells*
AC adapter, BC-196DA/SD*
Handstrap
Antenna
Belt clip

* depending on version

MODEL NUMBER

R6 16